BRADLEY KILLER PU 5'10" FUTURES FIN BOXES

Euroglass Bradley KILLER
5'10" x 19 5/8" x 23/8" 29.3L FUTURES fins required

Killer was designed to be an aggressively ridden small to medium wave all rounder that feels great underfoot. It has a medium exit rocker for easier paddling to flat belly rocker for planing speed in flatter waves and increased tail flip for controlling tight arcing turns. The dimensions are wider as this board should be ridden shorter. The outline is wide point forward and relatively straight railed down to a wide swallow for running speed and drive.

Best for:
Small to Medium waves
Intermediate to elite level surfers
Steep to Powerful waves

PU TECH
PU construction by Euroglass. The “P” gets its name from both the resin and the foam: polyester resin and the “U” comes from polyurethane foam . PU is the traditional surfboard construction since foam core surfboards were invented. It is still the most widely used construction method today. PU is often incorrectly referred to as “fiberglass” construction – the reason this is incorrect is because the same exact fiberglass cloth is used in both PU and Epoxy construction types, it’s the foam core and resin that soaks into the fiberglass cloth (and foam) that differ. While PU construction is generally slightly heavier and isn’t quite as strong as Epoxy construction, it tends to have a more reliable and predictable feeling whilst surfing. This is due primarily to a slower flex pattern and denser foam than epoxy construction, which basically causes less “surprises” and more predictability while surfing, especially when making hard or sharp turns. PU construction tends to be more naturally conducive to color work, especially translucent resin tints. PU is also a bit less sensitive to water infiltration and heat than epoxy construction.