EUROGLASS CHRISTIAAN BRADLEY KILLER FISH
5'6" x 18 3/4" x 2 3/16" 24.3L
Killer was designed to be an aggressively ridden small to medium wave all rounder that feels great underfoot. It has a medium exit rocker for easier paddling to flat belly rocker for planing speed in flatter waves and increased tail flip for controlling tight arcing turns. The dimensions are wider as this board should be ridden shorter. The outline is wide point forward and relatively straight railed down to a wide swallow for running speed and drive.
SMALL WAVE to MEDIUM WAVE
STEEP WAVE - POWERFUL WAVE
INTERMEDIATE LEVEL to ELITE LEVEL
Single to very slight double concave for running speed
Lifted nose and tail rocker for critical turns, flatter belly rocker
Medium volume performance rail shape
The wide point forward widens the front nose outline
FCS II 5 fin set up placed for manoeuvres and speed. Thrusters are great for turning, quads are great for generating and maintaining speed (fins not included but 10% off any purchased with a new board).
PU construction by Euroglass. The “P” gets its name from both the resin and the foam: polyester resin and the “U” comes from polyurethane foam . PU is the traditional surfboard construction since foam core surfboards were invented. It is still the most widely used construction method today. PU is often incorrectly referred to as “fiberglass” construction – the reason this is incorrect is because the same exact fiberglass cloth is used in both PU and Epoxy construction types, it’s the foam core and resin that soaks into the fiberglass cloth (and foam) that differ. While PU construction is generally slightly heavier and isn’t quite as strong as Epoxy construction, it tends to have a more reliable and predictable feeling whilst surfing. This is due primarily to a slower flex pattern and denser foam than epoxy construction, which basically causes less “surprises” and more predictability while surfing, especially when making hard or sharp turns. PU construction tends to be more naturally conducive to color work, especially translucent resin tints. PU is also a bit less sensitive to water infiltration and heat than epoxy construction.